Energy storage spot welding machines use electrical energy to instantly convert electrical energy into thermal energy. Electricity is very common, and automatic spot welding machines are suitable for working in dry environments without too many requirements. Due to their small size, simple operation, convenient use, faster speed than automatic spot welding machines, and strong weld seams after welding, they are widely used in various fields. Especially practical for parts that require high strength, it can instantly permanently connect the same metal material. After heat treatment, the weld seam has the same strength as the base material and is well sealed. This solves the problems of sealing and strength for the manufacturing of gas and liquid storage containers.
1. The energy storage spot welding machine used on site should be equipped with a rain proof, moisture-proof, and sun proof shed, and corresponding fire-fighting equipment should be installed.
2. Oil, wood, oxygen cylinders, acetylene generators and other explosive materials shall not be stacked within a 10m range of the energy storage spot welding machine welding site.
3. The welding operation and coordination personnel of the pneumatic energy storage spot welding machine must wear labor protection equipment according to regulations. And safety measures must be taken to prevent accidents such as electric shock, falling from heights, and fires.
4. The secondary tap connection copper plate of the energy storage spot welding machine should be tightly pressed, and the terminal post should have a washer. Before closing, the wiring nuts, bolts, and other components should be carefully inspected and confirmed to be intact, complete, and free from looseness or damage.
5. Before use, it is necessary to check and confirm that the primary and secondary wiring is correct, that the input voltage complies with the nameplate requirements of the welding machine, and that the type and applicable range of welding current for the energy storage spot welding machine are known. After connecting the power supply, it is strictly prohibited to touch the live parts of the primary circuit.
6. When moving the welding machine, the power should be cut off and the welding machine should not be moved by dragging the cable. When the energy storage spot welding machine suddenly loses power during welding, the power should be cut off immediately.
Dongguan Chuangde Laser Intelligent Technology Co., Ltd
One stop laser welding solution service provider
